Tongue and groove flooring is the most widely used joining method for solid wood flooring. Browse our tongue and groove range online today!
Chipboard Flooring Tongue & Groove Moisture Resistant sheets 18X2400X600MM 18mm thickness. Chipboard flooring t&g for floors.
- Tongue and groove flooring - 4.5" cover x 3 / 4" thickness; The present stock width needs approximately 8.7 linear metres layed, to cover 1 square metre of finished floor area; Don't forget you may have some wastage if you want to finish each board on a joist, as is the recommended practise.
Chipboard Flooring with tongue and groove for easy installation. It is also P5 moisture resistant and comes in sheets sized 18mmX2400mmX600mm. The chipboard flooring is easily laid using a simple tongue and groove joint.
SoundDeck acoustic floor boards comprise a resilient layer pre-bonded to 18mm or 22mm Tongue and Groove flooring grade chipboard designed to reduce impact sound. Regupol SoundDeck acoustic floor boards can be used as an acoustic overlay for refurbishments and RD concrete sub floors.
Untreated Tongue and Grooved Flooring (135mm x 18mm) Traditional and reliable, ready planed tongue and grooved redwood floorboards. Please note: Image is for illustration purposes only.
Our tongue and grooved chipboard flooring consists of a wide range of quality flooring products including accessories
Plywood Tongue and Groove Sub-floor is suitable to use as the base for carpet, hardwood, vinyl or tile flooring. Sanded to provide a smooth surface.
Tongue and groove solid wood flooring, as the name suggests, describes a flooring solution whereby each plank has a tongue and a groove. The grooves on tongue and groove solid wood flooring planks are cut into one long side and one short side of each plank and the tongues protrude on the other two sides.
Tongue and groove engineered wood flooring at unbeatable prices with free delivery. Go online or call 0203 869 0900.
Tongue & Groove (T&G) Flooring Plywood & Particleboard. Plywood Tongue and Groove is structural, C grade face and D grade back. Engineered product to architectural specification of F11 and F14.
Browse our range of 18mm with Tongue and Groove Installation Type
Floorboards - B&Q for all your home and garden supplies and advice on all the latest DIY trends
P5 Tongue & Groove Chipboard Floor Panel (L)2400mm (W)600mm (T)18mm - B&Q for all your home and garden supplies and advice on all the latest DIY trends
Would appreciate some advice on this one: I need to replace some floorboards in my house (1930's) The existing tongue and groove floorboards don't seem to be the same size (width) as ones currently available at Wickes, B&Q etc. but are the same thickness (18mm approx).
OSB3 Tongue & Groove 2400mm x 600mm x 18mm is a premium board for roofing or flooring applications, with edges machined to the finest tolerance for a perfect fit and faces calibrated to a standard finished thickness.
Boral 19mm tongue and groove solid strip flooring is precision milled, providing a wear layer that can be refinished many times over providing a lifetime of enjoyment. It is manufactured with a tongue and groove profile that is also end-matched for a tight board-to-board fit and a continuous, stable surface.