Determine where you want to construct a concrete patio, how large it will be, and its exact dimensions. The size of the patio determines the amount of concrete required and whether you will need a mixer. If the patio is too large in area, it might not be an easy DIY job. The location is also important.
Design and build the patio as an extension of the interior rooms in adjoins. Layout planning—determining in detail how to position the tiles—is one of the most important (and neglected) parts of any tile project.
In the past, when a concrete patio or driveway started to show serious signs of aging, using a jackhammer or bringing in a bulldozer were the only repair options. ... Step Seven // How to Renew Concrete Surfaces. Finish up. ... Sealing and Painting Concrete Flooring. Bring new life to damaged corners . Fixing Chipped Concrete Steps.
To add texture, throw mineral salt crystals in a pattern around the concrete, then press the salt into the concrete with a flat concrete hand tool. Let the salt sit overnight while the concrete sets. For this project, the crew used the salt finish around the edges of the patio but left the middle smooth.
Finish the concrete patio surface with design elements. Running a push-broom over the concrete patio makes a design both attractive and practical: lines that provide visual interest and a slip-resistant surface. Lay plastic over the new concrete patio. Concrete must be "cured" properly. The key to curing is not letting it dry out too fast.
Tips for Mixing, Pouring and Finishing the DIY Concrete Patio Get a hose and nozzle ready, so you can turn the water on and off as you need it while mixing. Make sure that you can get the concrete mixer to the project site .
Once your patio is clean, protect it from future stains by sealing it with a concrete sealer. Use a paint roller to apply the sealer. Start from the middle of the patio and roll the sealer out to the edges. Once it’s dry, you’ll have a sparkling clean patio that’s ready for outdoor entertaining.